ELECTRA-KOOL™ CENTRIFUGAL BLOWER FILTERS - ALWAYS IN STOCK

FACTORY TESTED & APPROVED – DO NOT SETTLE FOR LESS:

  • Simple assembly! Filter requires just one wingnut
  • Metal endcap and an expanded metal media protective cover
  • Rubber gasket for a tight seal against the housing face
  • Pleated filter surface for a LARGE surface area, extending its life and reducing your costs.

ELECTRA-KOOL™ BLOWER FILTER PART NUMBERS

DESCRIPTION GUIDE: Many of our filters come with a description like 150-PL in addition to the Part Number

Descriptions follows the MODEL-EXT formula: in the above example, 150 is the Electra-Kool Series, while PL stands for Pleated Paper Filter. A 150-PL is a pleated paper filter for a Model 150, or part number 10020 below.

Metal Mesh Polyester Pleated Paper HEPA Height OD ID

Model ↓      Ext →

MM

PE

PL

HEPA

Model 60

--

--

10061

--

4.75"
4.5"
3"

Model 150

10021

10031

10020

10018

7.5"
6"
4.5"

Model 500

10121

10131

10120

10126

7.5"
10.5"
6"

Model 1000

10221

10231

10220

10226

13.5"
10.5"
6"

Model 1400

10821

--

10822

--

9.75"
12"
8"

Model 2000

10352

--

13209

--

19.5"
12"
8"

Model 3000

13215

--

90002

--

21.5"
19.75"
14"

Filtration Level

Coarse

Medium

High/Fine

Very High/Fine

FILTER SPECIFICATIONS

  • Pleated Paper Filter (FINE filtration, shown on the left in the picture above)
    • Rated for 99.9% efficiency @ 0.5 microns nominal and 99.97% @ 1 micron nominal
    • Moisture & oil resistant for consistent performance in all climates
    • Filters out dust too small to see with the naked eye
  • HEPA Filter (VERY Fine filtration)
    • Filter rated 99.97% @ 0.3 microns nominal.
  • PREFILTER WRAPS are provided along with Blowers with Pleated Paper or HEPA filters
    • ½” thick, non-woven polyester to pick up larger particles and extend the life of the main filter
  • Metal Mesh filter (coarse filtration, shown in the picture at right above)
    • Rated 60% @ AC Fine Dust
    • Four layers of corrugated aluminum mesh
    • Long-lasting, corrosion resistant protection against coarse particulates
  • POLYESTER FILTERS (Medium Filtration)
    • Rated 98% @ 10 microns nominal
    • Coarser filtration than Pleated Paper but easier to wash and longer lasting
    • Moisture & oil resistant, low pressure-drop

ELECTRA-KOOL FILTERKITS™

Any Electra-Kool Filter can be converted into a FilterKIT™ by adding mounting hardware and a prefilter wrap (if for Pleated Paper or HEPA filters).

We only have part numbers for our Pleated Paper FilterKITs™ and Metal Mesh FilterKITs™, as we recently began offering and stocking Polyester and HEPA filters. Rest assured, FilterKITs for those materials are available at all times.

Electra-Kool Model Pleated Paper Metal Mesh Height OD ID

Model 150

10150
150-PPKIT

10155
150-MMKIT

7.5"
6"
4.5"

Model 500

10160
500-PPKIT

10165
500-MMKIT

7.5"
10.5"
6"

Model 1000

10170
1000-PPKIT

10175
1000-MMKIT

13.5"
10.5"
6"

Model 1400

10180
1400-PPKIT

10185
1400-MMKIT

9.75"
12"
8"

Model 2000

--

10195
2000-MMKIT

19.5"
12"
8"

Model 3000

--

10205
3000-MMKIT

21.5"
19.75"
14"

ELECTRA-KOOL PREFILTER

PREFILTERS are a low-cost filter wrap that extends the life of the main filter (shown here wrapped around a Model 150 Pleated Paper Filter).

  • ½” thick, non-woven polyester blankets that wrap around the main filter, filtering out larger particles
  • Standard with all Electra-Kool Pleated Paper or HEPA Filtered Blowers
  • Can be used as a coalescer to help prevent oil mist from entering filter
  • Double-wrapping can be more effective.
Electra-Kool Model Part # Description

Model 60

10062

60-PFB

Model 150

10022

150-PFB

Model 500

10122

500-PFB

Model 1000

10222

1000-PFB

Model 1400

10823

1400-PFB

We also sell full rolls of prefilter blanket material, in widths of 7″ or 13″. Always in stock for same day shipping.

IMPELLER REPLACEMENT KITS

Impeller (also called a Squirrel Cage) Replacement Kits are always in stock for those rare emergencies when your impeller needs to be replaced.

Electra-Kool Model Part # Description OD Height Bore Material

Model 500

10140

500-IMPKIT

5.75"
2.25"
5/8"
Aluminum

Model 1000

12813

1000-IMPKIT

6-3/8"
3.25"
5/8"
Powder Coated Steel

Model 1400

12807

1400-IMPKIT

8.25"
4.25"
5/8"
Powder Coated Steel

Model 2000

12907

2000-IMPKIT

8.25"
4.25"
1-1/8"
Reinforced Powder Coated Steel